NESS D8X Deluxe Panel and Navigator Touch Screen Keypad alarm kit.

Specifications:

  • BOX DIMENSIONS: (W – H – D) 235 x 300 x 90 mm
  • POWER SUPPLY: 17VAC 1.4 Amp Plug Pack (supplied)
  • POWER SUPPLY: 13.8v DC @ 800mA
  • QUIESCENT CURRENT DRAW: 80mA with 1 keypad
  • OPERATING VOLTAGE: 17VAC / 15V DC
  • RECHARGEABLE BATTERY: 12 volt 7.0 Amp/hour Sealed lead Acid
  • BATTERY CHARGING CURRENT: 350mA maximum, current limited
  • DYNAMIC BATTERY TEST: Backup battery is tested under load, hourly and on arming
  • FUSES: 2 Amp auto resetting / Siren output & Reset output.
    500mA auto resetting / 12 volt auxiliary outputs.
    200 mA auto resetting / Strobe output
  • ZONE OUTPUTS: 8 zone inputs. 2 x 24hr tamper inputs
  • END OF LINE RESISTOR: Choice of 12 programmable values including N/C.
    Default 2200 Ohms (2.2k)
  • MAXIMUM KEYPADS: 3 x Navigator Touch Keypads max.
  • INTEGRATED RADIO OPTIONS: Multi-pin connector for the optional Ness Radio Interface. Supports up to 55 Radio keys . Up to 8 radio zones
  • SERIAL HEADER: Serial data port for direct connect programming using NessCommsTM software. Also 2 way serial data
  • INTEGRATED ACCESS CONTROL: Multi-pin connector the optional Weigand Interface. Supports up to 3 Ness proximity access card readers
  • SIREN OUTPUT: On board siren driver with timed output. Maximum 3 x 8 Ohm horn speakers
  • STROBE OUTPUT: 12v DC timed output. Maximum 2 x 1 Watt strobe lights
  • RESET OUTPUT: 12v DC timed output. Max. 3 x 12v piezo screamers
  • EQUIPMENT POWER OUTPUT: 13.8v DC output for powering detectors and other equipment. Maximum 500mA
  • AUX READER: Multi-pin connector provides outputs Aux1, Aux2, Aux3, Aux4, 12v DC
NESS 106-110 DX8 alarm system

Need a security solution?

We’re happy to help, whether you’re already a Tiger Security customer, or a new one looking for advice. We also provide free quotes, and free appraisals of existing security systems.

Book an alarm technician

Auckland area only.

CALL TIGER SECURITY (09) 972 1890, 24/7